Installation
Broadloom Guidelines
All products are recommended for residential use only.
Follow residential installation standards outlined in CRI 105 published by the Carpet and Rug Institute, www.carpet-rug.org.
For additional information on natural fiber installation, or to find a certified installer visit www.nficnet.com.
Before Cutting
- Verify the product, pattern, color, and yardage are correct.
- Accurately measure before cutting.
- Please refer to Natural Characteristics (below) when inspecting. If there are concerns, STOP! Contact the supplier and provide photos if applicable.
- The outcome of the installation is in the hands of the installer. Claims will not be honored on cut, fabricated and/or installed material.
Determining Seaming Capabilities
- Certain backings and carpet construction require different installation techniques. Some carpets, such as hand braided, hand loomed, hand knotted, and handwoven are not recommended for broadloom installation when seaming is needed. Note that flatweave (including indoor/outdoor) products are not suited for seams.
- Verify seaming capability of product with installer. Natural fibers are unique, and seams may be more visible.
Proper Preparation
- Properly prepare substrates. Subfloor must be smooth, clean, dry, and flat.
- Not recommended for install over radiant heat.
- Proper curing time is essential when installing over newly finished hardwood floors.
- Ideally, carpet should be installed when the indoor temperature is between 65-80°F, with a maximum relative humidity of 65%.
- Let material acclimate to its new home (24-48 hours). Like most natural materials, fibers will expand and contract under different climates and moisture conditions.
Installation Considerations
- When stretch-in installation is appropriate, use an firm dense cushion.
- Before a direct glue installation, use a good quality primer for subfloors made of wood or concrete. Direct glue down with a high solid (65% - 68%) multipurpose adhesive is recommended.
- Latex backed product, such as sisal, jute or seagrass may be loose-laid or tacked but avoid stretching.
- Cloth backing should be removed at the seam to allow for the seaming tape to properly adhere. This applies to products that can be seamed.
- Premium latex seam sealer should be used for all seams.